Placement during installation of TopBrewer and accessories
Background:
What are the distance limitations in positioning the TopBrewer, fridge and other components from each other and what should be taken into account?
Reply:
As a general rule it is correct we suggest to have the fridge and the machine situated next to each other - but our system is flexible enough to accommodate special scenarios, such as if you would like to place the fridge elsewhere with the limitations in your space.
The faucet is shipped with 125cm / 4' 1ΒΌ' length of hose, measured from the base of the faucet itself to the tip of the hoses. This is the maximum travel we recommend, since coffee, milk etc would be 'out of sync' if it was longer.
So this distance could accommodate an alternate placement of the fridge ind relation to the machine and the faucet itself.
Please also see the attached diagram which would give you an overview of where each hose goes.
Also, please download the TopBrewer Pre-Install guide, to see how the components act in relation to each other. The latest one can always be found here: http://www.scanomat.com/dk/download-center