Your coffee machine is equipped with 4 programmable timers. These are designed to power the machine down in certain periods. The timers are all 24-hour based, meaning that not weekly or monthly functions are available.
Enter the adjust menu as described and press UP or DOWN until the display shows:
Press YES, and the display will show (example)
With the minutes blinking. OFF indicating that this is the time where your coffee machine will power off. Use the UP, DOWN and YES to adjust this time, and thereafter repeat he procedure with the ONtime. After that, you will get the option to activate or deactivate the timer in question.
Example: If you want your coffee machine to power down between 23:00 in the evening and 6:00 in the morning, adjust the timer1 to OFF: 23:00 and ON : 6:00 and set it to activated.
If you are using more than one active timer, make sure that the timer periods are not overlapping.
You do not need to go through all timer adjustment to set just one. When finished with one timer, simply press NO to go back out.
Turning the machine on and off (standby)
There are 2 ways of turning the machine off. Either by pressing and holding the ON/OFF button for 2 seconds, or by switching the power off completely by activating the mechanical switch in the dispensing area.
Using the first option, will keep the electronic board running with a very low power consumption (less than 1 watt). As the internal watch in the machine is dependent on power, always select this way to turn the machine off, if you are using this. When the machine is OFF, the light in the display will be gone, and only the Scanomat logo will be active.
Switching back on is done by pressing the ON/OFF button, or if this setting is active, by pressing a selection button
Machine power consumption:
Normal: 0,2A* 220V = 44Watt
Standby: 0,17A *220V 37,4Watt
Time function:0,17A*220V = 37,4Watt
Normal: 0,2A*220V 44Watt
Standby: 0,18A*220V 39,6Watt
Brewing: 10,6A*220V 2332Watt
Time function:0,18A*220V 39,6Watt
Please sign in to leave a comment.